Transient streambed hydraulic conductivity in channel and bar environments,Loup River,Nebraska     

Jesse T. Korus  Wilhelm P. Fraundorfer  Troy E. Gilmore  Kelsey Karnik 《水文研究》2020,34(14):3061-3077

Streambed hydraulic conductivity (K) and vertical K (K _v) are key controls on groundwater and surface water exchange and biogeochemical fluxes through the hyporheic zone, but drivers of transient hydraulic properties in different fluvial environments are poorly understood. This study combines hydrogeology, geophysics, and sedimentology to reveal mechanisms of K and K _v transience in the upper 0.5 m of a sandy streambed during low discharge. Hydraulic tests (44 slug tests, 130 falling-head permeameter tests) and 130 grain-size analyses were repeated three times over 8 weeks on a 1,200 m² grid spanning: (a) a channel with continuously flowing water and mobile bed load; (b) an adjacent mid-channel bar that was stationary and infrequently submerged. Aerial photographs and ground-penetrating radar show scour and complete reworking of fluvial sediments in the channel. Bar sediments below the water table remained immobile, but infrequent flows of moderate discharge reworked the uppermost few centimetres of the bar top. Despite differences in sediment mobility and stream flow characteristics across environments, K and K _v exhibited order-of-magnitude differences in spatial heterogeneity and temporal variability in both the channel and bar. Mean K and K _v values in the channel were comparatively stable over time. In the immobile bar, mean K declined 20% and K _v declined 26% after increased discharge temporarily inundated the bar. Grain-size distributions were steady across both environments over time, but repeat geophysical surveys of the bar show a decrease in electrical conductivity, likely from porosity reduction. These findings suggest that sediment dynamics and stream flow characteristics in different streambed environments are important drivers of K transience during low discharge conditions. Specifically, pore clogging can be an important mechanism of transience over short durations (weeks to months) in immobile sediments subject to infrequent flows and minor reworking.  相似文献   

基于岩体塑性位错理论的龙门山区域构造系统演化过程     

师皓宇  黄辅琼  马念杰  王永建  马骥  邹光华  彭瑞 《地质学报》2020,94(12):3581-3589

青藏高原对四川盆地的挤压作用导致了龙门山断裂带的形成及其山脉的隆起。本文以龙门山附近区域板块运动以及深部岩体力学特性为背景，采用FLAC3D软件模拟再现了时间跨度为700万年的龙门山区域构造系统演化过程。研究结果表明：在板块运动作用下，F1、F2和F3断层依次形成，贯通的断层对地表的抬升具有较强的控制作用，当断层贯通于地表后，龙门山及其以西的川西高原持续隆起，平均抬升速率约为138mm/yr，而龙门山断裂带以东的川西坳陷只有较小的抬升量，从而导致川西高原抬升8996 m, 致使该区域产生6000m左右的落差，模拟的地形特征与目前的龙门山地形地貌基本相似。依据模拟结果与实测资料，绘制了龙门山断裂带形成及其附近区域地形地貌的演化过程图，呈现了板块挤压、断层塑性位错、地表侵蚀和沉积作用等因素共同作用对地形地貌的塑造过程。  相似文献   

断层附近地应力扰动带宽度及其影响因素   总被引：3，自引：3，他引：0  

翁剑桥  曾联波  吕文雅  刘奇  祖克威 《地质力学学报》2020,26(1):39-47

在建立正断层模型的基础上，利用三维有限元数值模拟方法研究了断层附近地层中的地应力变化规律。其结果表明，由于断层活动，在断层附近普遍发育应力扰动带；在应力扰动带范围内，地应力方向和大小发生明显的变化，断层中部附近应力值普遍较低，而断层端部的应力值通常异常增大。应力扰动带的分布范围主要受断层规模的控制，与断裂带的岩石力学性质、断层走向、断层面形态和边界应力条件等因素也密切相关。随断层长度和断距逐步增大，应力扰动带的宽度相应增加。断裂带的岩石越破碎，其岩石弹性模量越低，断层对地应力的影响宽度越大。断层走向与区域最大水平主应力方向越接近垂直、断距与断层长度的比值越大，区域内的差应力越大，则扰动带宽度与断层规模的比值也越大。选择渤海湾盆地BZ-X油田进行验证，在建立油田实际三维地质模型基础上，根据边界应力条件，利用三维有限元方法对沙河街组二段的地应力分布进行了数值模拟计算。根据断层周围的地应力变化，确定了应力扰动带的分布范围，断层附近应力扰动带宽度的分布规律与正断层模型分析结果相一致。   相似文献   

大兴安岭两侧控盆断裂域地球物理场基本特征与地质意义          下载免费PDF全文

冯晅  孙成城  侯贺晟  赵建宇  俞海龙  康晓倩  刘乾 《地球物理学报》2019,62(3):1093-1105

大兴安岭重力梯度带两侧控盆断裂域的地球物理场基本特征与构造属性存在巨大差异,本文通过研究大兴安岭西坡德尔布干断裂以及松辽盆地中央孙吴—双辽断裂附近的重力、大地电磁测深资料,并结合满洲里—绥芬河地学断面(GGT)资料,对德尔布干断裂和孙吴—双辽断裂的控盆作用以及地质意义进行论述.研究结果表明:德尔布干断裂控制了海拉尔—根河盆地的演化,并在区域动力作用下被改造;使断裂深部倾向北西,浅部倾向南东.孙吴—双辽断裂控制着松辽盆地的形成演化,断裂深部倾向近垂直,浅部主要受太平洋西向俯冲和蒙古—鄂霍茨克洋闭合的影响,在浅部产生双向逆冲推覆构造.德尔布干断裂位于盆地的附近,由于岩浆沿断裂的侵入与喷发,因此有利于生烃也有利于形成重要的金属成矿带;孙吴—双辽断裂位于盆地中央,含油气层附近的双向逆冲推覆构造可能更有利于油气的聚集,使松辽盆地成为最重要的产油盆地之一.  相似文献   

郯庐断裂带苏皖段重力变化的多尺度分解与构造活动分析     

林承灏  黎哲君  徐如刚  袁泉 《大地测量与地球动力学》2019,39(9):884-889

基于多期绝对重力与相对重力联测资料，获取不同时空尺度的郯庐断裂带苏皖段及周边地区重力场动态变化，采用小波多尺度分解方法计算不同深度的重力变化，结合区域地质构造，从深度层次的横向变化与时间尺度的纵向变化2个方面进行分析。结果表明，研究区重力变化主要由中、上地壳密度变化或断裂构造活动引起。沿郯庐断裂带苏皖段走向断裂活动分布不均，受周边深大断裂带交切作用的影响表现出明显的分段活动特征。淮阴-响水口断裂、滁河断裂等深大活动断裂带构造活动对局部重力变化具有一定的控制作用，沿断裂带走向分布有明显的重力变化梯度带；郯庐断裂带郯城-泗县段、大别山构造带霍山-六安及江苏溧阳-镇江地区在小波细节动态变化中存在重力变化梯度带异常区，但强度不高，考虑到多条深大断裂交切于此，后期需要重点关注。  相似文献   

胶东焦家断裂带蚀变岩非镜像对称特征及其地质意义     

张亮亮  马生明  朱立新  林少一  周明岭  徐忠华  王建 《大地构造与成矿学》2020,(2):276-288

焦家断裂蚀变带是胶东地区最重要的控矿构造之一。该断裂带控制的矿床是创立“焦家式”金矿理论的重要实例基础。目前,焦家断裂带累计探明Au资源储量超过1200 t,并且还在不断增加,展现了深部重要的勘查和研究价值。焦家断裂带控制的矿体主要赋存在主断面下盘,断裂带发育于花岗岩中时,上盘发育钾长石化花岗岩、绢英岩化花岗岩、黄铁绢英岩化花岗质碎裂岩、(黄铁)绢英岩质碎裂岩,下盘发育黄铁绢英岩质碎裂岩、黄铁绢英岩化花岗质碎裂岩、黄铁绢英岩化花岗岩和钾化花岗岩,蚀变类型在主断面两侧呈现对称分布特征。但是在岩性特征、结构构造、蚀变强度、化学成分等方面差异明显,表现出非镜像对称特征。上盘蚀变岩厚度大于下盘,下盘花岗岩的构造破碎程度比上盘花岗岩更严重;断裂带上盘黄铁矿含量低、一般无矿化显示,下盘黄铁矿含量高,出现金矿化;断裂带上盘的中生代花岗岩中韧性变形不发育,以脆性破裂为主,下盘发育明显的韧性变形;断裂带上下盘不同蚀变带的成矿元素Au,矿化剂元素S,成矿伴生元素Ag、Pb、Zn,亲石分散元素Ba、Sr以及主量元素Na2O、MgO含量具有差异性,指示焦家断裂带主断裂面两盘经历了不同的成矿作用过程,下盘花岗岩的热液蚀变作用与成矿作用的关系更为密切。依据焦家断裂带不同蚀变带元素的非镜像对称性特征,可利用上、下盘花岗岩和构造蚀变带的地球化学标志识别矿体或者不同蚀变带的位置,对认识“焦家式”金矿床的成因机制、预测深部成矿前景、指导深部找矿具有重要理论和实际意义。  相似文献   

Deep gold mineralization features of Jiaojia metallogenic belt,Jiaodong gold Province: Based on the breakthrough of 3000 m exploration drilling     

《China Geology》2020,3(3):385-401

Recently, continuous breakthroughs have been made about deep gold prospecting in the Jiaodong gold province area of China. Approximately 5000 t of cumulative gold resources have been explored in Jiaodong, which has thus become an internationally noteworthy gold ore cluster. The gold exploration depth has been increased to about 2000 m from the previous <1000 m. To further explore the mineralization potential of the Jiaodong area at a depth of about 3000 m, the Shandong Institute of Geological Sciences has drilled an exploratory drillhole named “Deep drillhole ZK01” to a depth of 3266 m. Hence, as reported herein, the mineralization characteristics of the Jiaojia metallogenic belt have been successfully documented. ZK01 is, to date, the deepest borehole with an gold intersect in China, and constitutes a significant advance in deep gold prospecting in China. The findings of this study further indicate that the depth interval of 2000 m to 4000 m below the ground surface in the Wuyi Village area incorporates 912 t of inferred gold resources, while the depth interval of 2000 m to 4000 m below the surface across the Jiaodong area possesses about 4000 t of inferred gold resources. The Jiaojia Fault Belt tends to gently dip downward, having dip angles of about 25° and about 20° at vertical depths of 2000 m and 2850 m, respectively. The deep part of the Jiaojia metallogenic belt differs from the shallow and moderately deep parts about fracturing, alteration, mineralization, and tectonic type. The deep zones can generally be categorized from inside outward as cataclastic granite, granitic cataclasite, weakly beresitized granitic cataclasite, beresitized cataclasite, and gouge. These zones exhibit a gradual transitional relation or occur alternately and repeatedly. The mineralization degree of the pyritized cataclastic granite-type ore in the deep part of the Jiaojia metallogenic belt is closely related to the degree of pyrite vein development; that is, the higher the pyrite content, the wider the veins and the higher the gold grade. Compared to the shallow gold ores, the deep-seated gold ores have higher fineness and contain joseite, tetradymite, and native bismuth, suggesting that the deep gold mineralization temperature is higher and that mantle-sourced material may have contributed to this mineralization. ZK01 has also revealed that the deep-seated ore bodies in the Jiaojia metallogenic belt are principally situated above the main fracture plane (gouge) and hosted within the Linglong Granite, contradicting previous findings indicating that the moderately shallow gold ore bodies are usually hosted in the contact zone between the Linglong Granite and Jiaodong Group or meta-gabbro. These new discoveries are particularly significant because they can help correct mineralization prospecting models, determine favorable positions for deep prospecting, and improve metallogenic prediction and resource potential evaluation.  相似文献   

北祁连西段寒山金矿控矿构造及富集规律     

李生栋 《地质与勘探》2020,56(4):675-687

寒山金矿床产于北祁连西段加里东褶皱带北缘,区内矿产资源丰富,加强其控矿构造及矿化富集规律研究,对矿区勘查意义重大。通过野外调查及室内研究,发现矿区内赋矿地层为奥陶系阴沟群火山碎屑岩。矿区内褶皱构造及韧-脆性剪切带发育,联合控制了矿体的分布。韧-脆性剪切带发育在褶皱两翼,受层滑剪切系统控制。矿体产在背斜转折端及两翼韧-脆性剪切带内,呈楔形产出,向下迅速尖灭。研究认为,矿体主要富集在韧-脆性剪切带发育部位,矿体的富集程度与蚀变带规模正相关,靠近背斜转折端的位置为矿体富集地段,多阶段成矿作用同部位叠加构成富矿体。  相似文献   

Petrology and geochemistry of mafic and ultramafic cumulate rocks from the eastern part of the Sabzevar ophiolite (NE Iran): Implications for their petrogenesis and tectonic setting     

《地学前缘(英文版)》2020,11(6):2347-2364

The Late Cretaceous Sabzevar ophiolite represents one of the largest and most complete fragments of Tethyan oceanic lithosphere in the NE Iran. It is mainly composed of serpentinized mantle peridotites slices; nonetheless, minor tectonic slices of all crustal sequence constituents are observed in this ophiolite. The crustal sequence contains a well-developed ultramafic and mafic cumulates section, comprising plagioclase-bearing wehrlite, olivine clinopyroxenite, olivine gabbronorite, gabbronorite, amphibole gabbronorite and quartz gabbronorite with adcumulate, mesocumulate, heteradcumulate and orthocumulate textures. The crystallization order for these rocks is olivine ​± ​chromian spinel → clinopyroxene → plagioclase → orthopyroxene → amphibole. The presence of primary magmatic amphiboles in the cumulate rocks shows that the parent magma evolved under hydrous conditions. Geochemically, the studied rock units are characterized by low TiO₂ (0.18–0.57 ​wt.%), P₂O₅ (<0.05 ​wt.%), K₂O (0.01–0.51 ​wt.%) and total alkali contents (0.12–3.04 ​wt.%). They indicate fractionated trends in the chondrite-normalized rare earth element (REE) plots and multi-element diagrams (spider diagrams). The general trend of the spider diagrams exhibit slight enrichment in large ion lithophile elements (LILEs) relative to high field strength elements (HFSEs) and positive anomalies in Sr, Pb and Eu and negative anomalies in Zr and Nb relative to the adjacent elements. The REE plots of these rocks display increasing trend from La to Sm, positive Eu anomaly (Eu/Eu1 ​= ​1.06–1.54) and an almost flat pattern from medium REE (MREE) to heavy REE (HREE) region [(Gd/Yb)_N ​= ​1–1.17]. Moreover, clinopyroxenes from the cumulate rocks have low REE contents and show marked depletion in light REE (LREE) compared to MREE and HREE [(La/Sm)_N ​= ​0.10–0.27 and (La/Yb)_N ​= ​0.08–0.22]. The composition of calculated melts in equilibrium with the clinopyroxenes from less evolved cumulate samples are closely similar to island arc tholeiitic (IAT) magmas. Modal mineralogy, geochemical features and REE modeling indicate that Sabzevar cumulate rocks were formed by crystal accumulation from a hydrous depleted basaltic melt with IAT affinity. This melt has been produced by moderate to high degree (~15%) of partial melting a depleted mantle source, which partially underwent metasomatic enrichment from subducted slab components in an intra-oceanic arc setting.  相似文献   

古亚洲洋俯冲板片断离与后造山伸展：贺根山缝合带火山岩年代学和地球化学证据   总被引：1，自引：0，他引：1  

王金芳  李英杰  李红阳  董培培 《地质学报》2020,94(12):3561-3580

本文以出露于贺根山缝合带迪彦庙蛇绿混杂岩北侧的乌兰拜其白音高老组流纹岩- 粗面岩为研究对象，通过野外地质调查和岩石学、地球化学、锆石U- Pb年代学研究，探讨岩石成因类型、构造环境和古亚洲洋俯冲板片断离与后造山伸展过程。岩石地球化学研究表明, 乌兰拜其地区白音高老组流纹岩具有较高的SiO 2、Al 2O 3、K 2O和Na 2O+K 2O含量，以及较高的Ga/Al比值，相对贫CaO、MgO、Sr、Ba、Eu、Ti和P，稀土元素配分曲线为右倾海鸥式分布，负铕异常显著。该区粗面岩属于钾玄岩系列，具有高碱(Na 2O+K 2O)、高K 2O、高Al 2O 3、低TiO 2，富集Rb、Ba、U和轻稀土元素, 亏损 Nb、Ta 和 Ti，稀土元素配分曲线为右倾式分布。岩石学和岩石地球化学特征表明，乌兰拜其地区白音高老组流纹岩为迪彦庙- 白音布拉格蛇绿混杂岩带早白垩世后造山A型花岗岩浆的喷出相- A型流纹岩，其形成于后造山伸展构造环境；粗面岩为后造山型钾玄质火山岩，与洋壳俯冲作用有关，形成于俯冲板片断离- 后造山伸展构造背景。流纹岩和粗面岩锆石LA- ICP- MS U- Pb同位素测年，获得206Pb/238U加权平均年龄分别为140. 4±1. 2Ma和134. 9±1. 1Ma，表明白音高老组流纹岩- 粗面岩喷发于早白垩世，反映了贺根山缝合带早白垩世后造山A型花岗岩浆- 钾玄质岩浆作用事件。结合贺根山缝合带的壳幔电性结构特征和晚古生代蛇绿岩- 岛弧岩浆岩、中生代后造山A型岩浆岩的时空分布与演化关系，认为根山缝合带三叠纪- 早白垩世后造山伸展岩浆作用与古亚洲洋俯冲板片断离作用有关，提出了该区后造山A型花岗岩浆- 钾玄质岩浆作用的俯冲板片断离- 后造山伸展地球动力学模式。  相似文献